Hi,I want a sipmle configuration regarding to configure load balancing using BGP for two links. My netwrok topology is as below.So anyone have simple BGP load balancing configuration for this kind of network topology, please share with me .
HiI need to configure auto-failover for a link. That link provided by single ISP but via 2 POPs as primary and secondary link.So if Primary POP link went down, the traffic should pass to the secondary link. I don't know the exact configurations to c...
Hi ,Can i do load balancing for this 2 links using BGP. ? Because ip-sla is not working as load balancing. If i ping to destination ip by adding high pacet size continusely. but under ip-sla configuration traffic goes via one link.So i think it is be...
HiI have tested mentioned configuration in a simulation envirnment and worked finly. But if i trace desination ip form customer LAN, in the NAT table it shows only one link NAT Translation only. It is not shows the both path NAT translations. But if ...
In my previous configuration i add ip route as below.ip route 0.0.0.0 0.0.0.0 45.45.45.1 track 10 ip route 0.0.0.0 0.0.0.0 14.100.100.1 10So you asked me to add track 20 for 14.100.100.1 ip address ? like belowip route 0.0.0.0 0.0.0.0 45.45.45.1 trac...