Hello,   I was trying to con\figure VPN but that failed and I noticed I can't ping from inside ASA1 to inside ASA2 here is how it is setup.  from 192.168.10.100 to 192.168.20.100   PC---ASA(NY)---ASA(LA)---PC   PC192.168.10.100 --192.168.10.1--ASA--1...

Hello, I bought a used IPS 4225 to learn about IPS, I am having problem figuring out how to connect it physically to my home network and be able to access it through the GUI. I searched for about 3 days trying to figure it out but couldn't find anyth...

we have at a remote site 2 x 5508 WLC as primary and seconday not HA. we both were booted all of the APs associated with the secondary Controller. I check the config on the AP and it is setup correctly to have the Primary first and the other controll...

Hello, I am trying to figure out how to allow some users to login to WLC GUI with read access only, and also to have read only to Switches and Router. the ACS is version 5.2.0.26.8 and the WLC are 5508 version 8.0.121.0 thanks

Hello, I had a strange configuration that puzzled me. we have a new WS-C2960XR-24PS-I with c2960x-universalk9-mz.150-2a.EX5.bin. runing as a layer 3 switch I configured IP router on the device but the device would not be pingable then I configured ip...