Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a command to suppress output warnings in IOS? I am trying to use Cisco Prime to configure a template to deploy to all my switches so that they will all have a standard configuration, but when I apply:spanning-tree portfast defaultI get the w...
We've got Unity Connection 8.5 and we're having an issue with the voice recognition. We have users call in to the main line and get the directory handler and they will try to speak the name of the person they are trying to call. The problem is that w...
I've found some discussion on this, but nothing that's helped resolve so I'm hoping someone can help. We recently purchased a 2112 WLC, running version 6.0.199.4. I have everything running through a single port on the controller, which is connected t...
Rob,Thank you!! I had found the voice recognition confidence setting in the Advanced->Conversations area of the System Settings, but that seems to only affect the commands a user can give. I didn't know about a confidence setting within the handler i...
Jeff,The vlan mtu setting has no effect on intra-vlan packets, but rather on inter-vlan packets. So, if the VLAN mtu was set to the default 1500, but it received a packet from another VLAN destined for VLAN 22 in your example, it would not pass it be...
So, after calling TAC, the fix ended up being to go into the Advanced tab on the wireless section of the controller and check the box for Pre-standard 802.3af switches as the source of power. By default, both that box and the Power Injector box were ...
Thanks Kayle. I'll try that tomorrow.Scott, thank you so much for your time and efforts. I upgraded to 7.0.230.0 and have the same symptoms, though the error messages in the WLC logs are different now. They now say that the radio is disabled, but the...
