Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'm using cut through proxy in my customer firewall. And I want to user mac-exempt for some PC to bypass authentication, but after I put PC's mac-address into mac-exempt, the PC still challenge by cut through proxy authentication.mac-list aaa_mac_...
Hi All,I have a common problem with FXO disconnect. The FXO integrated to Pabx. Using router 2801/2811 with IOS version c2800nm-advipservicesk9-mz.150-1.M3.bin. I already tried all of possible configuration in this forum but still not work. FYI, I'm ...
Hi, I'm using LMS 3.2 and I can open the topology services from LMS server itself.This LMS didn't use a DNS resolutionI can telnet from my laptop to port 42342 and 43242 using the LMS IP Address and Hostname, But unfortunately I still cannot open T...
Hi, everything going normal except a problem to resolve Display name on Chassis view, after checking on the Internet, there are BUG CSCta13528 and need to be patch from CiscoAfter I applied the patch on customer Ciscoworks server, License server wont...
Hi Paulo, Thankss for your guidance, finally I recorded the disconnect tone and fix my cadence parameter to this: voice class custom-cptone Disconnect dualtone disconnect frequency 425 cadence 350 350And I found a great link to record the disconnec...
Hi Paolo,Thanks for your reply, I'll try your recommendation. If the problem still exist how to record the disconnect tone?voice-port 0/1/1 trunk-group to-PABX supervisory disconnect dualtone mid-call supervisory custom-cptone Disconnect cptone ID ti...
Hi Mermel,Finally I found the problem, I'm using the real IP address and remove NAT on LMS Server.Change Common Service > Security > Single-Server management > Certificate Setup > Server Name back to real IP address..And the topology services can wor...
Hi Mermel, Thanks for your suggestionPoint 1, LMS Server hostname is WIN-ERMZMLL6WQKPoint 2, I can telnet to both port using LMS Hostname and NAT IP Address (10.255.7.80) --> IP real is 172.18.7.80Point 3, the value is same with LMS Server hostnameF...
