03-16-2011 09:41 PM
Hi, I'm using LMS 3.2 and I can open the topology services from LMS server itself.
This LMS didn't use a DNS resolution
I can telnet from my laptop to port 42342 and 43242 using the LMS IP Address and Hostname, But unfortunately I still cannot open Topology Services from my laptop.
I already disable AV at my laptop and Ciscowork Server.
Looking forward for your advice.
03-17-2011 12:41 AM
can you provide more information about the failure, a screenshot or the content of the java console or the exact message you get;
some common reasons are pop-up blocker and the wrong java version on your client;
03-17-2011 08:50 AM
03-17-2011 09:13 AM
I would suggest you need to check again for hostname issues;
1) check the hostname of the LMS server with the command "hostname" in a DOS box of the server
2) from the client try to telnet to the ports 42342 and 43242 using the hostname from step 1); like this in a DOS box on the client:
telnet yourlmsServer 42342
3) check the entry of PX_HOST in the file
NMSROOT\lib\classpath\md.properties
(NMSROOT is your installation path; windows default: C:\Program Files\CSCOpx)
if the value of PX_HOST is different form the one in step 1) test if the mentioned ports are available using this name
4) if you cannot establish a connection with one of the names you have to fix this issue by either adding a DNS entry or adding the names to the clients hosts file
03-17-2011 07:14 PM
Hi Mermel, Thanks for your suggestion
Point 1, LMS Server hostname is WIN-ERMZMLL6WQK
Point 2, I can telnet to both port using LMS Hostname and NAT IP Address (10.255.7.80) --> IP real is 172.18.7.80
Point 3, the value is same with LMS Server hostname
For your info, actually I already set the LMS not using DNS resolveable by changing hostname to NAT IP Address (10.255.7.80) on
Common Service > Security > Single-Server management > Certificate Setup > Server Name
And I already add LMS Server hostname to etc host file on my windows.
Still didn't work..
03-17-2011 11:23 PM
Hi Mermel,
Finally I found the problem, I'm using the real IP address and remove NAT on LMS Server.
Change Common Service > Security > Single-Server management > Certificate Setup > Server Name back to real IP address..
And the topology services can works..
Thanks for your support.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide