About ianbell

ianbell · 05-17-2011

I wonder if someone could clarify the following please?In the Cisco UC540 - 560 platforms we have an embedded SNR feature. My question is; what features do we have from the mobile device?If I answer the call on a mobile can i?transfer the call back ...

ianbell · 01-11-2011

Hello There - I am deploying a Cisco 1841 in place of our basic DSL router.I have an ADSL WIC and FA0/0 connected to our LAN.LAN IP ADDRESS range is 192.168.1.0/24 I have dynamic and static NAT configured. At this point although I have ACL's configu...

ianbell · 06-03-2008

I am trying to install a 2801 CME router with VIC2-2BRI-NT/TE onto telefonica supplied BRI Circuits. I cannot get layer 2 up. their circuits are setup as Point to point is their anyway to get the CME to work with point to point? I have already set...

User/Network locales · 05-20-2008

I am experiencing difficulties in changing my CME 4.0(2) with 7941 handsets to the spanish locale I have downloaded the tar file installed and archived it into my 2801 router archived the folder and created alias directories assigned it to the teleph...

ianbell · 05-28-2011

Hi helpdeskI have been working with a supplier I work with here in the UK. They are almost their with full call reporting etc. However also built into their application they have the ability for real time stats and wall board functionality on an LCD ...

ianbell · 05-18-2011

Hi David,Thank for your prompt responses much appreciated. Just let you know I have received the same responses from cisco as well. Sent from Cisco Technical Support iPhone App

ianbell · 05-17-2011

Hi David,Transferring the call to and forth can be achieved if I am sitting near my IP Phone. Correct?I was hoping that there may be FAC codes to transfer the call from the mobile to another desk IP phone just like you can with an IP Phone or a POT p...

ianbell · 05-17-2011

Hi David,Thank you for your response. This is not what I was driving my question at. I understand this feature. What I hope to achieve is this. I am on the road (away from my office) I answer my mobile phone which is a SNR call. I now need to transfe...

ianbell · 02-14-2011

In your CCA, where you configure your FTP URL and credentials. The URL should look like the following example. 192.168.1.1/CDRSent from Cisco Technical Support iPhone App

Member Since	‎11-04-2004 02:24 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	25
Total Helpful Votes Received	5

User Statistics

User Activity

Single Number Reach Features

inbound SMTP to our exchange server through a cisco 1841 rejected

ISDN BRI in Spain CME 2801 Issue

User/Network locales

Re: Real Time Call Reporting

Re: Single Number Reach Features

Re: Single Number Reach Features

Re: Single Number Reach Features

Re: UC560 CDR export to FTP suddenly stopped with error 516