About macgyver1988

macgyver1988 · 12-01-2016

Hi, THIS IS PART 2, Because the olds too long this is my running-config .... but theres one problem: by adding on GigabitEthernet0/1 ipv6 traffic-filter WAN_OUTSIDE_INv6 in ---------------------------- i wont get any DHCP Adresses on my lan Interface...

macgyver1988 · 10-03-2016

Hi, theres an Cisco 1921er Router within an SEC Lic. My Provider does DUALSTACK on WAN (ipv4 and ipv6). My Problem: Clients on GigabitEthernet0/1 can only via ipv4 on the Internet,by enable IPV6 it will not works when disable ipv4 and actiate ipv6 o...

macgyver1988 · 08-02-2016

Hi i bought a used Cisco 1921 ISG2 Router to replace my Fritzbox. My ISP is MNET, so i cannot connect to the Internet via LAN. ISP says:(WAN VPI/VCI is 1/32 VLAN 40 My Setup ist Telephoneline<<------> Cisco 1921 via (EHWIC-VA-DSLB) an the Interna...

macgyver1988 · 12-02-2016

Hi Gpauwen, ok this is the situation Wan <-->Cisco1921 on GigabitEthernet0/1 is connected with the Internal Lan (only IPV4) (when activating ipv6 , i have on some sides internet troubles.....) on GigabitEthernet0/0 is connected with the VOIP (only...

macgyver1988 · 12-02-2016

Hi one Question : when i start a request on the Cisco Router: sh ipv6 int brief is is important, that my Dialer needs an Dialer0 IPV6 Address?

macgyver1988 · 12-01-2016

Stop: i removed the traffic Filter command as you sayed. Now all Clients are also getting IPV6 Adresses....but i cant get Internet with ipv6 on most Sides like egun.de i also can start the page egun.de but when click on a german symbol then it sto...

macgyver1988 · 12-01-2016

after removing this command on Interface GigabitEthernet0/1 *Dec 1 22:19:42: %IPV6_ACL-6-ACCESSLOGP: list WAN_OUTSIDE_INv6/100 denied udp FE80::10C6:5BFF:8B33:C3(546) (GigabitEthernet0/1 a820.6652.4e84) -> FF02::1:2(547), 1 packet *Dec 1 22:24:09:...

macgyver1988 · 12-01-2016

Hi Gpauwen, thanks. So what can we do now..... Fact ist , there is a Mistake at my config and i ask me why it works when i add this command on the Interface.....but what i made wrong.....you guess the ACL ? I dont know and i am with google at the en...

Member Since	‎08-02-2016 08:30 AM
Date Last Visited	‎04-05-2021 06:02 AM
Posts	43

User Statistics

User Activity

Cisco 1921 Client Access wont work, only with ipv4 Part 2

Cisco 1921 Router, Internet client acces works only with ipv4

Cisco 1921 Router, cannot connect to Internet

Hi Gpauwen,

Hi one Question : when i

Stop:

after removing this command

Hi Gpauwen,