About vadoodetm

vadoodetm · 10-28-2012

I have a AS5350XM. This is what I have got on it. I know that the device is outdated but wanted to find modules from ebay and upgrade it to support 2 more E1 lines. I intend to buy another E1 2 PRI DFC card and install it on the slot 2. But I am not ...

vadoodetm · 10-25-2012

Hi,I have a 2811 which I inted to insert a VWIC2-2MFT-T1/E1 module on it and create trunks with a Panasonic TDA600 pbx. The extension card on Panasonic is PRI30.I need the router to translate channels on this trunk to SIP. A SIP trunk will be made be...

vadoodetm · 09-05-2012

Hi,I have a AS5350 with E1 2 PRI DFC on it. E1 line is terminated on the cisco AS5350 and then there is a trunk between this and an Asterisk server. The setup works fine and all incoming calls are forwarded to asterisk server and properly handled. Pr...

vadoodetm · 10-26-2012

Thank you roger,I still cannot tell if DSP is needed for my scenario.

vadoodetm · 09-08-2012

Paolo Bevilacqua wrote:That normally indicates an issue with overlap receiving. Because a cellephons sends the full number at once, while landline can use overlap.Any hints on how can I troubleshoot this? Or at least how I can make sure what the real...

vadoodetm · 09-08-2012

Paolo Bevilacqua wrote:You have to ask your telco why they do not relay digits in-band after call is connected.However, you have to prove that nothing is received first, while it is received, but not handled by your thirdy party device, as I was sugg...

vadoodetm · 09-05-2012

We need this behaviour. We want to answer the call as soos as caller stops dialing more numbers. this is done using this interdigit timeout.I mean if the caller dials 5 numbers he sill be directed to attendant, and if 7 he will be directed to the app...

vadoodetm · 09-05-2012

Thank you Paolo for the comment.I think destination-pattern thing is just fine. My problem occurs during a call. I mean when during the call, a caller tries to press 2 to send a DTMF tone to IVR, it fails. All other digits work.

Member Since	‎09-05-2012 01:05 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	12

User Statistics

User Activity

How to upgrade AS5350XM

E1 Trunk with Panasonic box, will VWIC2-2MFT-T1/E1 work?

Problem with notify messages on E1 line and AS5350

E1 Trunk with Panasonic box, will VWIC2-2MFT-T1/E1 work?

Problem with notify messages on E1 line and AS5350

Problem with notify messages on E1 line and AS5350

Problem with notify messages on E1 line and AS5350

Re: Problem with notify messages on E1 line and AS5350