Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have several ASA's with a /28 on a single "outside" interface.
We host individual customer servers, using private addressing, on each inside interface - ifname Company-X
We are trying to setup each company with their own AnyConnect client ...
Hello,
I have the following setup in my data center for connectivity from multiple cores to multiple edges (each edge connects to multiple providers).
Edge-1 Ten 2/1 <-----------> Core-1 Ten 9/1 (VLAN 961)
Edge-2 Ten 2/1 <-----------> Core-1 Ten ...
My VPN clients have been access the "inside" network for a long time. Recently there was a need to add a dmz network and allow access from the VPN clients.
VPN clients can connect, and access the inside network.
VPN clients can connect, but cannot ...
In my many years as a network engineer I have experienced almost all of the trials and tribulations from the explosion of the internet. The increase of bandwidth, transport technology, transport media, number of routes, even the transition from IPv4...
I recently installed an RV130w on the edge of a small network. The router has a WAN connection with three VLANs on the inside. VLAN 1 and 4 are trunked on LAN port 1 to a Cisco 3750G. VLAN 7 is "untagged" on LAN port 4 to a separate entity that ut...
Joseph,
It appears you are correct. The "default" bandwidth is one gig. I have a maintenance window scheduled for next Friday night and will take the opportunity to execute the 'bandwidth' command on the SVI's.
Thank you
For those still having this problem, the solution (workaround) has been found.The issue is with the single port forwarding. To get around the problem, remove the single port forward and create a port forward range (of one port). i.e. range start 33...
Problem found. CSCut98735DescriptionSymptom:- Port Forwarding stops working after a while- Starts working again after rebooting routerConditions:- Port Forwarding configuredWorkaround:- Only known workaround is to reboot the router- Will work for a w...
