Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am using ACS 5.0.0.21 appliance, I have configured the network device and using the ACS local database for authentication.It is working fine.Now I need if ACS fails or client not able to communicate to ACS I should be able to login to the device...
Hi,I have two site having 4507 both sides and connected to with a Metro Ethernet point to point, I am running eigrp to get access to local subnets of each location from other.There are ASAs connected to each 4507 for outside access with default route...
I see very high CPU Utilization in my 4507R (98-99 %) while the BW usage shows 1% and memory 58%.No dynamic routing is running only static routing with 5 VLANs.I dont see any alert as well.Please suggest.
Hi,I have two sites and those have their own set up with security and routing devices.Now i have to conenct these two sites using point to point link (say 100 mbps). I have one interface (Management one) available on one side ASA and one interface aa...
Thanks a Ton! it works, i need one more help, i have created a group (and users in that) with level 7 access in that group shell profile, but they are not able to use sh run etc, commands on the devices...any clue
Hi,Thanks for reply, if i take option 2 thenwill any access restricyion i have to take care specailly, it will be great if you can provide saome sample config.Thanks in advance
Hi, Thanks for your quick reply.So you mean to say;1. I ll run the eigrp between a site and ASA.2. Rest access list config will be same as any local subent for that 4507.let le know if any change needed.
Sorry, writing in this topic, bit urgent:Hi, I have two site having 4507 both sides and connected to with a Metro Ethernet point to point, I am running eigrp to get access to local subnets of each location from other. There are ASAs connected to each...
