I have configured a service on CSS11506 with keepalive type http and method GET and uri "/". I don't want CSS to compute hash value and compare it and only use 200 ok status for service to stay alive. The content on the web server will be changing an...

When I execute "show mod csm 5 real" the output shows Probe_Failed and Failed. What is the difference between failed and Probe_failed or if someone can provide the description for Probe_failed state.Thanks

Upgraded Webns on 11800 from ap0500311s to ap0500510s. The virtual routers on all CSS's were down. As soon as we restored the switches back to WebNS ap0500311s, pings to VRRP addresses were working (as they were before the upgrade), & virtual router...

Cisco 6509 CATOS 6.3(7)I have etherchannel configured on dot1q (desirable)trunk on the switch. When I change the etherchannel mode from "on" to "desirable" on one side of the trunk, the port was reset. Is there any workaround to avoid this port reset...

I have an isl trunk setup between 2900XL switch and 3640 router. Switch has IOS 12.0(5.3)WC(1),and router is running 12.1(5)T10. On switch after every 10 seconds 1 CRC and 1 input error is incremented and the keepalive is also set to 10 seconds. Plea...