Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have the following scenario:2 webserver running each one ports 80,81,82,83,84and i have a content rule defined in port 80.At the end i want that all the request that comes to the VIP port 80 be balanced through the 2 webservers in the differents...
Hi,I have the following scenario:2 webserver running each one ports 80,81,82,83,84and i have a content rule defined in port 80.At the end i want that all the request that comes to the VIP port 80 be balanced through the 2 webservers in the differents...
Which solutions can i have if i implement in my branchs officces an Aironet Wireless Lan and i want to use the CSACS for the authentication proccess.The fact is that i dont't want to depent on the Wan link for the authenticacion Proccess, if the CSAC...
Anybody have seen the following problem:I have a Catalyst 4006 and a Catalyst 3500 Xl.When i try to connect a 3500 with a Fiber optic Patch cord to the 4006 Fiber Supervisor Port the link never come up. But if i connect the fiber between the 3500 Xl ...
HiI want to know which consideration should i need to have for configure in the same Router Lan to Lan Ipsec Vpn and Remote Access(Dynamic Crypto Map) Ipsec Vpn.I have read that the Dynamic Crypto map need to have a lower priority than the Static cry...
Sorry for the previous Post.I have the g729 Phones configured in the remote Offices, for Wan Bandwith savings pourposes, but this is the case in which the calls fails. In the Remote officces when the g729 wants to make a call to a Pstn this call come...
ok, maybe i have to explain more clearly the situation. In the Central office i have a Call Manager and a VG200 with the NM-HD modules.The VG200 have 2 T1 lines for the PSTN. In the Branch offices i have an IP Phone and is configured to use g711, an...
im doing this procedure too, but doesn't function .When the IP Call Manager send the .cnf file to the Phone it says the untranslated call manager ip address.Can i modify this file with the Nated call manager only for certain ip phones??
