Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi, Do you need the XL Scalable Feature License in order to do 1M routes on the N7K M3 linecards? I can see on the datasheet for the M2 cards that the XL license is mentioned, but it is not mentioned on the datasheet for the M3 linecards. thanks in a...
hi,I am using NAT with the overload option and I see this entry in the show ip nat translations,Pro Inside global Inside local Outside local Outside globaltcp x.x.x.x:80 192.168.1.1:60830 y.y.y.y:80 ...
hello,I am trying to test the MTU between two 3750 switches I have in the lab. I've set the MTU with the command "system mtu 9000" on both switches and rebooted. The only connections on the switches are the gig ports connecting the two switches. Ea...
hi,It seems there are two conflicting pieces of information about support for FCoE on the F2 module for the Nexus 7k.This document says that the F2 module does support FCoE.http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9402/data_sheet_...
hi Sandor, Here is the show power info for the 8sfp module. The system only needs 35 watts for the module. Switch#sh power detailPower Fan InlineSupply Model No Type Status Senso...
look at the show run. Is there a switch provisioned? switch 1 provision ws-c2960xr-24td-iswitch 2 provision ws-c2960xr-24pd-i If yes, boot up each switch on its own and remove the provision with no switch # provision. Then try connecting the stack ...
