Hi,As a begineer in ASA, I'm trying to configure a 5505 to allow 3 hosts to access 4 servers in different routed networks. The 3 hosts are on the same vlan so I would think transparent firewall would work for this. The example below is from Config n...

I'm new to SONET and our fiber project is still in the backhoe stage, but the equipment is here. Anyone have suggestions on powering up our two 15310 in a back to back arrangment that will not overun the optics. is there a simple 1+1 config to test t...

SONET circuit prices are a deal that we can't refuse. Looking to replace ATM-oc3/CES modules in the 7206VXR with the PA-POS-OC3SMI and t1 cards. Has anyone done this before? Order a noncatenated STM1 for 3 voice t1's and the rest IP data? Thanks

Need Help in directing logins to the log/syslog, etcI have done the following: Logging history infomational Logging xxx.xxx.xxx.xxx line aux 0logging synchronouslogging level allline con 0logging synchronouslogging level allthanks

Topology is a c7206 with ATM 0c3 in IP network with Point to Point VPIs within our private network. Our Telco was suggesting internet access via policy based routing and ACL through ATM VPI/subinterface over the FastE- then connect into the firewall...