Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 switches split across 2 datacentres connected via an interconnect. Over the past couple of days the interconnect provider's Cisco kit has shut down our port (err-disabled) due to a broadcast storm. They had the level set at 1 which I thou...
We have 2 ASA 5510s configured in a Active/Passive pair.We've had a couple of incidents lately where the interconnect between our 2 sites goes down and the secondary firewall instead of switching to Active and staying there until it see the primary A...
I have a Cisco ASA 5510 running 8.2(1)I have a QoS policy which limits the traffic between any server in our office to a DR server in a secondary location which limits data replication traffic to 5Mbps. Occassionaly this is exceeded and then snaps b...
I'm using a SIP provider and outbound calls are failing and I think the culprit is Remote-Party-ID being enabled on the phone by the UC320.How can I disable this?ThanksDarren
I have just started working on a new UC320W and am struggling to see how to enable international dialing.I have the 9 prefix set for outside line but can only dial US numbers. The units region has been set to US as it will be installed in our US off...
I appreciate that this was nearly a year ago, but I'm having similar issues and this is one of few posts where anyone else was having issues with a client VPN accessing a remote VLAN on a different site.Do you remember what you did to fix it?
Still not having much joy with this. At the moment I'm not seeing large numbers of layer 2 or layer 3 broadcasts so not sure where the switch is getting this information. Is there any more information I can get from the switch using debugging?Thanks...
Hi John, yes that was a display filter.Even if I capture everything I can't seem to find any sort of broadcasts in the numbers that the switch is reporting.
We recently replaced an ASA in each site running v7 with a new one, more RAM and with v8 (we don't have Cisco maintenance so not entitled to upgrade).They've been configured with pretty much the same config. The only really difference is that the ou...
