Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have 2 ACE appliances running in active/standby. On each appliance I have port 3 used for FT and port 4 used for server traffic. Every one of the connections terminates on a 3750 10/100 switch. The switch ports (all configured as access ports) a...
I am having a redirect/rewrite problem with my ACE module. When the user types in https://citix.com and accepts the cert, I need the ace to add the following path to the url.../citrix/accessplatform/auth/login.aspx. That part works, but the page is...
I have built an ipsec L2L tunnel between the outside interfaces of a pix 515 (7.2.1) and an asa 5520 (8.0.2). I want the inside network of each firewall to be able to communicate with each other through the tunnel, but I cant get any traffic to pass...
I have an ASA 5505 at a small site and the ISP assigns my outside interface an IP address and default gateway. However, when power goes out (I know I need to get battery backup), my ASA loses its IP address and default gateway. It will not get it b...
I am new to the ACE and having a problem figuring out how to allow the server team to manager their servers sitting behind the ACE modules. Load balancing is working great. ex...rserver1 = 172.17.252.10rserver2 = 172.17.252.11vip = 172.17.252.15Cur...
the goal would be to segregate your PCs and your customers network. Therefore you would use your ASA to separate the networks...your PCs --> e1 interface of ASAcustomer switch --> e2 interface of ASAyour router --> e0 interface of ASA- Marc
In this scenario, you would have some logical separation of traffic. Lets take all LAN traffic. This will flow to Context A's inside interface of this context would need to be set as the default gateway for all of the connected devices. Now, lets ...
in the future, you may not want to provide your real working IP addresses for security purposes...Look at the default gateway on the ASA. If I am reading this correctly, it will be fa0/0 on the router x.x.12.166. You will not be able to tell the VL...
