Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I have a Design that I need to implement, one of our customers is injecting the same route from 3 different gateways and need every site to exist from the nearest gateways ( I cant rely on the IGP). so I have to mark this route from the Diff...
Dears,
I need to implement a scenario to one of my customers, he needs:
Limit the Interfaces to a specific bandwidth ( 4 Mbps , 10 Mbps , 20 Mbps )all the interfaces will have the same gate-way IP( Router IP)
customer has a Switch (3560-48PS) and a...
Hello,
I need to upgrade my CISCO switch IOS but I have no Available space in the flash for the 2 IOS. can I delete the available IOS and in the same session I downloaded the new IOS or the switch will crach
my cisco switch is 3560-48PS
I want to check if my below configuration is correct or no
I need to rate limit all the traffic entering the Fa0/45 to 20 Mbps, so I need to check if the below configuration matches this need
---------------------------------------------------------...
Dear Philip,
how i can use the archive download-sw command. as i need to upgrade
from
c3560-ipbase-mz.122-35.SE5
to
c3560-ipbasek9-mz.122-55.SE10 (11.5 Mbyte)
and the only available memory is (6928384 bytes free)
Dear Leo,
the below is the dir
Switch#dirDirectory of flash:/
2 -rwx 5 Mar 1 1993 09:13:45 +00:00 private-config.text 3 -rwx 1036 Mar 1 1993 01:43:42 +00:00 vlan.dat 4 -rwx 9314 Dec 24 1993 07:19:13 +00:00 config.old 5 drwx 192 Mar 1 1993 00:09:08 ...
