Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Was this bug ever fixed? I have it in 12.2(18)SXF7.HSRP VMAC is a static entry pointing to "Router" on standby swtich and so the HSRP VIP cannot be pinged from there or from any system reaching their default gateway through it. The active switch fo...
Question (Q1):Can I really use an overlapping subnet/mask in both an area range and summary-address commands in OSPF?Example:area 1 range 172.31.1.0 255.255.255.0summary-address 172.31.1.0 255.255.255.0Background:I use the 172.31 range for all the /3...
Does adding additional L5 rules increase processing time? I recall back in the day of the CSS 11000, it was claimed the box was not impacted by additional rules and processed at near line rate. Obviously, adding your first L5 rule for a given VIP w...
I have an Internet Data Center configured as an NSSA; it is not yet connected to the rest of our corporate network via OSPF. When this DC connects to our backbone, I intend to summarize the area at the NSSA ABR for the backbone, but I'd prefer to no...
I've been working with TAC on this problem for over 2 days and I think I just figured out the problem myself. I attempted to add a simple L7 inline URL match to send "/images/.*" to a different serverfarm, but the behavior of doing this with mostly ...
Excellent post Joe. I just ran into the same issue. I initially thought the SSL proxy somehow prevented L5 rule matching from working, then I tried disabling rule persistence before finally finding this post via another one that talked about ...
I started seeing the exact same symptoms that Zappo described. Mine are unusual in that they typically occur at the exact time each day and recovers quickly after 1s. The interfaces are 1000BaseSX (fiber), so I've ruled out the janitors firing up a...
This was such a promising post as it described my problem exactly with the ACE Module A2(3.3).I am seeing the client's WS and SACK options being cleared by the ACE when traffic is only routed through the ACE (i.e., not loadbalanced), and there are no...
For clarification, the same router is a ASBR/ABR. Essentially, I had an ABR that also became an ASBR after I redistributed the static subnets to get the non-OSPF loopback/mgmt devices. Re Q3: Since the aggregate I'm after is just that /24 for the l...
