About clougher01

clougher01 · 03-14-2012

Hey guys any issues with this design?Cucm 8.6 pub, presence, UC & Uccx in country A.Cucm 8.6 sub and seperate Uccx in country B.Mpls link with 55ms latency between sites.Plan is run 2 seperate Uccx servers.Point Uccx and agents/phones to sub in count...

clougher01 · 03-04-2012

Hey all,Any way to do a Video broadcast with a 4520 bridge and a 2911 with pvdm3..We want the bridge to dial out to all locations. If the 9971 video phones dial in to a 2911 conf using pvdm3's is there a way to get the bridge to dial out to that conf...

clougher01 · 03-29-2011

Hi Guys,Will E20 & T150 Tandberg Video phones register with CME8.5 for voice calls?Thanks in advance..

clougher01 · 03-09-2011

Hi there,I've read several discussions regards upgrading from CUCM earlier versions to UCS 8.5..I understand that DMA isnt supported on UCS8.5.Some say a provisional upgrade to 7.x first is the best the option then upgrade to 8 using DRS.I dont have ...

clougher01 · 02-10-2011

Hi there,Got some questions regards UCCX ver 8.x deployment.I have a customer with their Main site in one country and a remote site in another. They are connected with an MPLS link.Main site has CUCM6, UCCX7 and 14 UCCX agents.Remote site has 14 UCCX...

clougher01 · 03-14-2012

They have 5meg between sites..I thought we only needed 1.5meg as only Pub>Sub replication?Also does this replication traffic need to be in a specific queue class over the Wan or can we run it as scavenger etc?

clougher01 · 03-04-2012

Thanks for the reply. We have decided to go with a show and share live record option over multicast. Much easier than using local gateways in adhoc meetings..Sent from Cisco Technical Support iPad App

clougher01 · 03-09-2011

We need to keep the existing server running and can't upgrade it so as I thought last option is bat. Is there many changes from bat6 to bat8.5?

clougher01 · 08-31-2010

Ok thanks i'll have to check if the cisco-softphone incorporates the same ports as the cisco phone..

clougher01 · 08-31-2010

Thanks.. Can this be done from windows mobile devices though?

Member Since	‎12-09-2007 05:22 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	131

User Statistics

User Activity

Cucm design qu

Video broadcast with bridge and pvdm3

Will an E20 work with cme 8.5?

Best data migration method from cucm6.1 to ucs8.5

UCCX8 over Wan

Cucm design qu

Re: Video broadcast with bridge and pvdm3

Re: Best data migration method from cucm6.1 to ucs8.5

Re: QOS for Communicator clients

Re: owa via asa