Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a site-to-site vpn set up between our ASA 5510 and a Pix 515. Everything works fine with a Domain controllers synching from the remote site to the main site. I am having an issue with our backup server not being able to connect to the server...
I have not worked with the lower end routers, so I am working on a hunch. I have a dlink wireless router handing out addresses through dhcp for public access. I also have my private network on a switch with a server handing out addresses. I would ...
I come from a definity G1 background and am learning CCM 5.04. I don't know the Cisco terminology for what I need, so please bear with me. We need to add an extension that can be selected from the after-hours greeting. This extension will only for...
I am trying to set the storage location in the disaster recovery module in Cisco Call Manager, but it is having trouble logging in to the SFTP server. I can connect to the server manually with the credentials using WinSCP in SSH only mode. When I t...
When I sniff this I get an IsystemActivator Malformed packet response from the NAS device responding to the BDC. Are you familiar with this type of error. It would appear that this is not a network issue, but rather an OS issue with their negotiati...
Thank you for your offer of assistance.I can ping both ways. I have permit any any on the inside interface of the ASA. The only acl on the pix outbound is for the nat control of the interesting traffic to the private side via the tunnel. The domai...
I switched SFTP servers to the one listed in a previous forum string. I am now using freeFTPd and it is working. I had tried CoreFTP miniserver and FTPShell with no success. Thanks for your reply, though.
