Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
ACS 4.0 box would not allow access by web. Connected to serial port, logged in and did show for status. Some services were stopped. One was in stopping and a couple were starting. I did a reboot and after an hour services are still in same status. On...
After correctly stopping the controller, we shut the router off to replace another interface. After powering up, the service-module wlan-controller 1/0 status responds with "waiting for registration message" then "trying to recover from error". After...
I am attempting to load SDM 2.3.2 on to my new router. Installed successfully to pc. Fails on file copy. I have tried several options. Plenty of available mem on router. Have power-cycled the router and pc. is there a way to manually load sdm files?T...
My currentvpn authentication for remote users (3005 VPN Concentrator) is to the Windows 2003 Active Directory. We want to separate the local network and remote access authentication and are looking for suggestions for improvement. I do not want to us...
I have two consultants working in an office with a linksys dsl router. Both are connecting back to a 3000 concentrator from laptops with the cisco vpn client loaded. Today both logged on at the same time and are getting peer connection error #427. is...
When I look under IOS Downloads, the closest I can find is 12.2.2-XQ(DF) which defers to 12.2(2)XH which I cannot find. The actual error that I get on boot is PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0x390This is in slot 0 of th...
