Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys, Came across some doc for DSCP on MPLs which states label can carry class values and mpls EXP bits carry drop value. If thats the case how can i see the class value in label and here are they mentioning 20 bits label? And is there any pre-d...
Hi All I have configured E1 in the voice Media Gw on AS5400XM using ss7 on pri-groupand also the E1 using mgcp protocol,i can able to do both the configuration on the same MGWbut the links are fluctuating while trying to activate.Could any one tell m...
Hi Vaibav, If you have internet service with same provider for both HQ and other location then you can advertise just /25 from you new location without any change in HQ. It's up to provider to advertise you segment.Regards,V Dinesh Kumar
Hi, Only consideration here is communication b/w dmz's and reachability to server from internet via redundant link in case of failure of primary.For reachability to server via Internet========================== Are you having your ow...
Hi Marcus, Can you give us hint on your setup. If you have similar setup as given in your refference URL then you should be running Mp-BGP for VPN routes exchange and IGP for Edge & Core reachability. And you should have enabled tag-switchin...
Hi, It seems you are not running IGP, only option is to have static route. And have check on rechability from PE's to the next-hop ips for the route you are receiving via M-BGP. And if problem is not solved, upload the n/w diag with segmen...
