About Mike_Rapp

Mike_Rapp · 10-26-2020

I have one network that does not show the System Manager on it. Is there a way to add System Manager without having to re-create the network? BTW we have licenses for System Manager.

Mike_Rapp · 03-28-2019

How come I have to create two different entries for one network if I have multiple layer 3 devices? Example: I have a Security Appliance and a Layer 3 Switch. I have to create one network for the Security Appliance, labeled NETWORK1-Security. The res...

Mike_Rapp · 02-15-2019

Hello,I have an IOS device that was setup with Apple Configurator and Meraki MDM. My issue is the device is managed by Merki, but not supervised in System Manager. I need this device to be supervised as we use it for a Kiosk and need to lock down to ...

Mike_Rapp · 09-11-2018

I have done some research and cannot come up with a reason as to why the following is occurring:The following switch ports in the Internal - switch network changed their link speeds. Internal - Switch 40 Access port on VLAN 12100 Mbps to 1 Gbps I doe...

Mike_Rapp · 07-31-2018

We have one network with two switches plugged directly into the firewall Mx84. Upon looking at the topology for this network, there is a red diamond on the leg to the second switch. The message, when the cursor is hovered over it is, "A switch was de...

Mike_Rapp · 10-26-2020

That worked perfectly. Created a new System Manager network and then combined the two networks with no issues.

Mike_Rapp · 03-29-2019

Thanks everyone for the responses.

Mike_Rapp · 03-28-2019

Before we combined one of our networks, the MX appliance was tracking clients by IP. When we went to combine the networks, this is the message we are getting:"Security appliance networks tracking clients by IP addresses cannot be combined with other ...

Mike_Rapp · 03-28-2019

When configured all together the MX saw all the traffic from the switch...do we not have something configured correctly

Mike_Rapp · 02-15-2019

Thanks, I managed to figure out how to remove the device from apple DEP and then re-prepared the device with Apple Configurator 2. Device is functioning as expected now.

Member Since	‎08-08-2017 09:24 AM
Date Last Visited	‎03-28-2026 01:04 AM
Posts	22
Total Helpful Votes Received	17

User Statistics

User Activity

System Manager not showing on network

Multiple Layer 3 Devices no allowed in the same network on the dashboard?

IOS device is managed but not supervised

Network Link Speeds

Switch was detected that improperly forwards LLDP Packets

Re: System Manager not showing on network

Re: Multiple Layer 3 Devices no allowed in the same network on the dashboard?

Re: Multiple Layer 3 Devices no allowed in the same network on the dashboard?

Re: Multiple Layer 3 Devices no allowed in the same network on the dashboard?

Re: IOS device is managed but not supervised