Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
QuestionHello,I am using Anyconnect-win 4.8 on Windows 10When Anyconnect is running , surf on Internet is very slow.On Windows 7 , I have no slow problem...Is it possible to resolve this problem ?Thanks by advance...Answer
Hello,I am using Anyconnect-win 4.8 on Windows 10When Anyconnect is running , surf on Internet is very slow.On Windows 7 , I have no slow problem... Is it possible to resolve this problem ? Thanks by advance...
Hi all,
I have a Cisco RV320 and I need to configure a VPN Ipsec (gateway to gateway) with 3 different remote subnet.
Local subnet = 192.168.1.0/24
Remote subnet = 10.20.6.0/24 , 10.32.140.0/22 , 172.16.0.0/22
Is it possible ?
Hi all,I'm trying to configure multiple Vlan on one port but it's not working.My configuration : 3 SG500 in stack mode, mode router, version firmware 1.4.1.03Scwitch1 , port-1/1 Vlan1-Untagged PVID=Vlan1 (trunk mode) , port-1/6 Vlan6-Untagged PVID=Vl...
Hello,I have a question about the new Nat commande on asa 5505 v 831.How can I translate this nat commande from asa 5505 v802 in asa 5505 v831 ?Commande in asa 5505 v802 : access-list EURODATA extended permit ip 10.19.3.0 255.255.255.0 10.20....
Hi all,To complete my configuration : - all Vlan have an IP address assigned - switchs are in mode router, layer 3As suggested by Mark, I have connected on port-2/3 a linux sever, with one nic.The nic have 2 IP : one IP in Vlan1, one IP in Vlan6.I ...
Hi Mark,Thank you for your reply.I will try your suggestion : pc/nic that can read the tagging at the source device.I will inform you from the result...(next week)
I followed your instructions and all is OK now.We can say that the problem is resolved.Many thanks for your helpBest regardsEric Arnould , EURODATA France
Traffic to Internet must be locally.A part of my configuration is :interface Vlan1 nameif inside security-level 100 ip address 20.30.44.250 255.255.0.0 !interface Vlan2 nameif outside security-level 0 ip address 888.888.888.888 !interface Ethernet0/0...
