Hi, is it possible to install the latest release of the UNIX ACS also on the Solaris 9 or 10? In the release notes only Solaris 8 or older is mentioned. Thanks, Peter Filo
Hello, I have a problem to establish a VPN connection between these two boxes. As a Cisco I use a 1721 router with the c1700-k8sy7-mz.122-15.T5.bin IOS.A tunnel can be established only from Cisco box to WatchGuard Firebox. When Watchguard tries to es...
Hello, I am using VPDN ( L2F ) connection to my central office. For some reasons I need to configure the connection so, that it would automatically hang up after some inactivity time. The problem is, that the inactivity timer in my operating system ...
Hello, what does the Cisco router do, when it receives BECN or FECN bit from the Frame Relay network. Does it reduce the speed of outgoing data ? Please describe the situation, when the Cisco router has configured frame-relay traffic shaping and when...
I found the EOL statement only for version 1.0. The 2.3.6 UNIX version is still in the price list, do you have a link to the EOL statement also for the latest UNIX version?
Thank you for your help, I found that the problem was in the sequence of commands, how I have configured the network statement. With the following script, I got the error message that ospf is not enabled on f0/0!conf t router ospf 5628 vrf INETnetwor...
You are absolute right in this, but this is not my problem. I will try to explain it once again. Currently I have the following configuration on my PE router!router ospf 5628 vrf INET network 194.154.224.0 0.0.31.255 area 0!the f0/0 interface has thi...
I have three Internet routers connected together over Ethernet ( only one of them is MPLS PE router running Internet in VRF, others are classic Internet routers ) and I need to run OSPF because I need to receive routing information from the two Inter...
