About Markus Pethe

Markus Pethe · 05-03-2006

We have an Cisco 1721 Router at an RemoteSite with an single PC attached directly to the Router FastEthernet Interface. When the PC is turned of the FasEth also goes down. Is there an trick to become always an response to an ping to the FastEthernets...

Markus Pethe · 03-07-2006

Is there a way to clear the counters of Port-Security Security Violation?

Markus Pethe · 01-19-2006

Did anyone of you found an Configuration Example for an secure Connection between two 1310 Bridges.

Markus Pethe · 05-03-2006

Thank you it's working on my Testrouter. Now I have to convince my Provider to make it so...Thank you all for your fast responses!

Markus Pethe · 03-08-2006

univercd wasn't very helpfull so I hoped sombody nows an trick or so...But Thanks for your fast repleys!

Markus Pethe · 03-08-2006

I only want to clear the Counters of Security-Violations without rebooting the Switch. I don't like counters growing the hole uptime.

Markus Pethe · 01-22-2006

Thanks for your replys!I also added this: *dot11 ssid #max-associations 1 ! So after the other bridge is associated no more would be allowed (I hope)I also tried to apply the filter *dot11 radio 0 #l2-filter block-arpBut when I do this on both sides...

Markus Pethe · 08-29-2005

Try to set the encapsulation on the 355012G to dot1q. [switchport trunk encapsulation dot1q]

Member Since	‎03-18-2004 11:08 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	9

User Statistics

User Activity

Router 17xx FastEthernet always pingable

counter reset for show port-security

Securely Connect two BR1310 Bridges

Re: Router 17xx FastEthernet always pingable

Re: counter reset for show port-security

Re: counter reset for show port-security

Re: Securely Connect two BR1310 Bridges

Re: 2950 SX and 3550-12G Connection Problem