Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi.
I have looked all over the internet and documentations for this but could not find how to remove all ntp servers in a single command for cisco switches 2960, 4500, etc...
basically I have over 1000+ switches that need to change ntp servers. All ...
Hi. When I tried scp from my linux box, I was prompted for the password but the result returned "Secure copy: Access Denied." is this related to aaa or ACL? Please advise.
Thanks.
We recently had this issue where customer reported that they had intermittently VPN interruptions. The mismatch lifetime parameters will cause intermittent issue because it will tear down the tunnel when the lifetime time is up, then re-negotiate, bu...
You need to create enable secret password if you haven't and modify this line below from "local" to "enable". What that line means is that when your switch is unable to communicate with a radius server, it moves on to "local" (this is local user/pass...
Switch#
conf tboot manualendreload
It worked!
Don't forgot to negate the command to reset to default like this "no boot manual"after you done; else it keeps going back to switch: rommon mode. Once it is up, type "show boot" and you will the status...
I have this problem with a stack of 5. Member #2 is having this error. Running version 7.3.5E. Switch seems to operating normal. What can be not normal about this error?
