Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I was wondering if the Jabber client displays the presence status of other phones in the culster (linked to a user, but the user himself does not have a Jabber client)?If yes, can you provide me the steps required for this setup? We have a cust...
Hello,I am encoutering an very strange behaviour.ECOS - FXS port on FXS112 - SCCP - CUCM cluster - H323 - VoiceRouter - E1 - ProviderWe have an ECOS system, which is an emergency system that sends out a message in case of emergency. The system dials ...
Hello,I was wondering if the CUCM 8.5 is installed on the inactive partition of the CUCM when upgrading from 6.1.5, or if the upgrade is overwriting the CUCM 6.1.5 (like the upgrade to 8.6).Thanks a lot,Best regards,Antoine Meunier
Hello, I have a question concerning VWICs and 3945e Voice Routers.Our customer uses 3945e Voice Routers, and we want to add VWICs in it. Now, part of the box already uses VWIC3-modules, but we still have some VWIC2-modules that we could use.Can we co...
Hello,I have understood that when an IP-phone is falling to SRST mode, the forward all destination that was configured will disappear.I want to know if it is possible to configure a forward all destination when the IP-phone is in SRST mode?Do I have ...
Hello Alex,Thanks a lot for the info.I have one more question concerning this hardware:Can you use a VWIC2 with a PVDM3 and a VWIC3 with a PVDM2?Thanks!Best regards,Antoine
Hello Ronak,Thanks for the answer.However, what I would like to know, is that if users are able to activate a forward all when the IP-phone is in SRST mode, just the same way the do in normal mode.Thank you,Best regards,Antoine
