Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I'd like to do the following:User connects to SSL VPN with his Username and Password. After this connection I want the ASA or ACS or whatever to send a second generated onetime Password to the User eg. an E-Mail or SMS. The User then enters the ot...
We're upgrading our network. As a part of the process we're replacing our 1750 Routers with a ASA 5505 with the latest software version 8.0.4.As far as ACLs, NAT'ing and routing goes so the config is the same on the new box.The problem is with a remo...
Hi,as far as i understand, setting dscp to 46 for voice is recommended.if i look at the dscp-cos map, 46 is mapped to 5 but there's no equal mapping in the cos-dscp map. so why not just use dscp 48 ? it's in both maps, so i don't have do any changes ...
Hi !Here's what i'd like to do:i've got 2 x 6500 Switches SUP2 connected.Now I'd like to connect my 29xx Switches one GB/Port Trunk to the first 6500 and the other GB/Port Trunk to the second 6500. So if one 6500 fails, the other can take over.Spanni...
Hi !I've the following messages flooding my syslog serverDeny tcp src outside: xxx.xxx.xxx.xxx/80 dst inside: xxx.xxx.xxx.xxx/PAT Port by access-group "external"and the same for port 25. I found a post with the same question from 2003 but no answer.H...
Looks like we got it, the provider uses a different vlan tag for the shdsl connection butuses the same ip network 192.168.x.x. So wehave vlan 1 on the inside Network and vlan 101 over the shdsl connection. We're now trying theSecurity Plus License an...
Hi,maybe we should go and ask Symantec ;-).The inside boxes all connect to an inside vip 10.1.0.25. The outbound connection is the physical ip of one of the nodes (as i said) that's all i know.My Problem is with smtp. My internal Mail-Server connects...
