Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a client that is using static NAT to access a server environment. The user is currently being NAT'ed coming inside to outside, using the standard config. They want to be able to go from Outside In, using the same IP address.Exc.192.60.251.42...
I am consoled into a new switch, 3560, and when viewing the config, it does not give me the "more" option to display the next page. I have changed the term length to see if that helps, and it does change the number of lines displayed, but it never g...
Hi all,I am using ACS ver3.1 and it is doing both TACACS and Radius (IETF) authentication. It is causing my windows domain password to continually be locked out. I can go through the web program to unlock it, but within 15 to 2 hrs its locked again...
I am trying to upgrade the IOS on my CDM4650. I went from ECDN software to ACNS 503. The path I took was, ECDN to ANCS 425, to ACNS 501, to ACNS 503. On the way I lost my internal Ethernet adapter. Does anyone know how to get it back. I can enab...
We are seeing the same issue. Nexus 4001i and it just rebooted with this error.
Does anyone know if this is a bug, do we need to upgrade IOS, any idea?
----- reset reason for Supervisor-module 1 (from Supervisor in slot 1) ---1) At 561957 usecs afte...
Jon, what I beleve needs to happen, is the reverse of the NAT when traffic comes into the server environment. There is only one path in and out, so user traffic has to pass through the router and get NAT'd, but that is only one way traffic. It need...
Jon, we use NAT to control access into an environment.So the user accessing the server 172.27.234.77, from his workstation 192.60.251.42, gets natted from 192.60.251.42 to 172.224.120.120. What the user wants to do is run some applications on his de...
this is sh term. I had set the term length to 400 so I could display the whole config. Switch#sh termLine 2, Location: "", Type: "LINUX"Length: 400 lines, Width: 80 columnsBaud rate (TX/RX) is 9600/9600Status: PSI Enabled, Ready, Active, No Exit Ban...
