Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Meraki Access Manager appears to perform case-sensitive matching when resolving certificate identities to Entra ID users.If your certificate SAN contains [email protected] and Meraki stores the UPN as [email protected], the match will fail—even t...
We have a button automation set up to take snapshots and then send an email notification. Randomly, the snapshot will no longer be included in the email. It happens maybe once a month and I'm not sure how to resolve it other than rebooting everythi...
I have a switch on a test network and specifically set it up without VLAN 1 so it is getting it's dhcp and connection to the meraki cloud on vlan 7 which is what I wanted. Seems to be working fine except for the orange icon and warning. I didn't ha...
When ever I do a packet capture on an Access Point Wireless interface, all clients are disconnected from the AP which is an MR45 running firmware 26.4. Anyone know why that would happen? I'm trying to diagnose abnormal traffic coming from a specific...
We ran into what looks like the same issue in our environment, except we're using machine certificates instead of user certs.Our setup:Identity is set to SAN:DNSOur SCEP profile adds a SAN DNS attribute with the value {{DeviceName}}.mydomain.localWhe...
I had the same issue with Meraki branded 1GB SFP modules. I did get it in eventually but I had to try a few times and press very hard. The proline brand is much cheaper and actually goes in easier on the MS425. However, don't install proline modul...
Just found some more info regarding other brands and stacking two switches with one cable. It sounds like it works fine just isn't recommended for redundancy reasons.https://networkengineering.stackexchange.com/questions/62651/how-many-stack-cables-...
My two, two switch stacks have been up for over a year after software upgrades and several reboots, still no issue in the dashboard. I don't mind adding a second cable to the switches that have the dedicated stack ports on the back just to be safe t...
