About Ramses Smeyers

Ramses Smeyers · 09-20-2012

Windows 2008 R2 DHCPLinux ISC DHCP server Windows 2008 R2 DHCP Cisco VXC clients require option 186 to find the VXCM server. The following is a step-by-step guide to define option 186. See also https://supportforums.cisco.com/docs/DOC-25185 for...

Ramses Smeyers · 10-14-2014

Cisco is no longer making Infiniband switches, that is correct.Please do know the vBlock 540 does not consist of such switched and please do have a look @ http://www.vce.com/asset/documents/vblock-540-data-sheet.pdf to get more information on this.

Ramses Smeyers · 07-30-2014

To enable port-channel between IOM and FI, have a look @ http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-0/b_UCSM_GUI_Configuration_Guide_2_0/b_UCSM_GUI_Configuration_Guide_2_0_chapter_01100.html#d108099e588a1635For t...

Ramses Smeyers · 07-30-2014

When performing an update, you should verify "show vpc" and look for the following lines:vPC domain id : 53Peer status : peer adjacency formed okvPC keep-alive status : peer is aliveConfiguration ...

Ramses Smeyers · 07-29-2014

Hi Tenaro, 1: yes, between IOM and FI you can use a port-channel, this will allow 1 blade to have more then 10Gbit/s bandwidth, although off course 1 flow can only use 10Gbit/s2: yes, you can do this on the nxos part of the FI (login to UCSM via ssh ...

Ramses Smeyers · 02-25-2009

Unfortunately CiscoWorks LMS 3.0 (and neither LMS 3.1) cannot manage non-cisco devices.

Member Since	‎01-30-2009 01:53 AM
Date Last Visited	‎10-08-2024 03:50 AM
Posts	6
Total Helpful Votes Received	40

User Statistics

User Activity

Configure option 186 for VXCM

Cisco is no longer making

To enable port-channel

When performing an update,

Hi Tenaro, 1: yes, between

Re: Can Ciscoworks LMS managed non-Cisco products?