Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, I am trying to graph my Nexus 5000's in Cacti but cannot find the correct MIB or OIDs that reference CPU and memory utilisation.I have used Cisco's various search tools as well as Google but have been unsuccessful so far. If anyone could poin...
Hi all, in regards to the configuration below, what exactly does the following two commands do: class class-default shape average 800000 8000My interpretation is that the "class-default" applies the "shape average 800000 8000" shaping to the whole ...
Hi all, I am trying to get my head around SRR but have hit a road block.In regards to this command:mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7It looks the DSCP values (0 1 2 3 4 5 6 7) are being mapped to queue 4, threshold...
Hi all, I am interested in purchasing a couple of 3550 switches for my home lab, however, I was just wanting to know what the difference between them and the 3750's?Also, do the 3550's support NBAR?Thanks.
Hi all, I was just after a bit more information about how exactly CEF works. For example, if CEF is set up correctly, and if you've got a MLS A (multi layer switch) connected to MLS B, will MLS A send packets to MLS B using CEF and then will MLS B fo...
Hi Are your sure there is no NAT going on between your VPN client and the Loopback VPN terminating point? The Microsoft Agile VPN client does not like NAT at the router however they do have some registry settings they may help your situation. Have a ...
Hi,Vista VPN not supported with Nat i.e moving public address to loopback has broken your once working config. The VPN termination must be on a public ip address of the router.Hope this helps,Regards,Peter.
Thanks for the information.Functionality wise, what does the 3750 do that the 3550 can't?I have heard SRR, NAT and NBAR, but was wanting to know, is there anything else?
