Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Now we're deploying IPV6 in the campus. we want to use IPv6 Stateless Auto-configuration to get ipv6 address, and stateless DHCPv6 to get dns, domain, etc.platform: CAT4500-SUP5-10GE, ios: cat4000-i9s-mz.122-25.EWA11.binif we upgrade 4507 ios to ad...
when the 1262 connect to the access switch, it can't get IP address (we create DHCP pool), but strangely, when I replace with AP1142, it works fine, get ip and register to WLC.coz 1262 is already put in a box outside, so I can't set MODE button.Only ...
HI, friends . I have some questions about PIM dr and forwarder election.here's my topologyR1(f0/0)-----------(f0/0)R2(f1/1)----------------(f1/1)R4 | | | ...
Hi,guyshere's a BGP as-path configuration questionsBB1(254)-------(R1-------R2---------R3)----------BB2(254)R1/R2/R3 belong to AS 645121.1.1.1----R1's loopback150.1.1.254------BB2's addR3: show ip bgpNetwork next-hop ...
guys, I have some problems with etherchannel configuration3 switches(3550/3560): SW1-------SW2--------SW3 (both connecting with each other with two ports, SW3 connects with SW1 also having two ports)SW1/SW2/SW3: inter range f0/19 -20 ...
I tested another AP with same cable, and worked fine....coz I can't press MODE button, unable to set AP's default ip address 10.0.0.1is there anyway to restore 1262(LAP) to factory default though CLI?
thanks u scott,I've tried that commandcapwap ap ip address 192.168.201.89 255.255.255.0*Mar 1 00:18:48.196: %CAPWAP-3-STATIC_TO_DHCP_IP: Could not discover WLC using static IP. Forcing AP to use DHCP.*Mar 1 00:18:58.203: %CAPWAP-3-ERRORLOG: Not sen...
thank you all, friends.Especially, thank you, peter.actually, I didn't memtion the BIDIR mode. I used SM on all routers and I think it only ralated to DR and forwarderRegards
