Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Recently I upgrade one catalyst switch 6506 with 2xSUP720 and 2x WS-X6724-SFP with LH SFP modules . The problem is when disconnecting the optical links with the 3500XL and 2950G that was previously connected to the 6506 via an old WS-X6416-GBIC card...
I have a central site and four remote sites connected via leased lines, I receive a demo with 3 WAE-612-K9 (4.0.9 s/w version)for testing purposes. I connect one WAE as a CM and one WAE as application acceleration at the central site and the another ...
I need to connect 2 ATA186 with H323 SW rel. 3.0.1 inside an ip network into two different places connected via WAN without using any gatekeeper or callmanager only the two devices back-to-back. It's possible to achieve this ? How?
I have Callmanager 3.1.2c on the central site and 20 branch offices connected via low speed 64 or 128 kb/s leased lines. I need to use 7960 ip phones on the branches to talk all over the WAN and use 1751-V as local voice gateways to the PSTN public n...
You have builtin B-ACD scripts embedded on the IOS , app-b-acd-aa and app-b-acd are already available . http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/bacd/configuration/guide/40bacd.html#wp1083384
Of course I try to reverse the fiber pairs first, the weird about this is that the old GBIC WS-G5486 can communicate but the new SFP 1000BASE-LX/LH don't.
Yes Zach , I see a lot of PT No Peer messages.Maybe if I use acl's to filter the traffic from each interface captured to WCCP I will see better statistics ? I think of that because there is traffic to other sites via the 3845 too, so in the Gig 0/0 i...
Yes I see some connetions to be optmized, my problem/question is why I cannot see http optimization for my intranet site since the traffic is marked PT . I am using the default policy in both WAEs , as I can see the policy marks http traffic to be fu...
