Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
UCS : 5108 with M2 and M3 bladesSTG : NetApp (iscsi)VM : Vmware 5.0I've gotten iscsi boot working with VMware 5.0 and have run into a couple of issues. Hopefully you guys can help me out.1) I've got 2 iscsi vNICs (for redundancy purposes) setup in my...
IOS : c2960s-universalk9-mz.122-55.SE3.binI've seen several threads and articles on this situation but have not yet come to a conclusion - I'm assuming the issue is due to an IOS incompatibility but according to Cisco documentation this is not the ca...
I need to terminate a multi-mode gig fiber connection into a 4948-10GE switch (X2 10gb slots) but it appears that the switch does not support the twingig convertors. Has anyone done anything like this? I'd like to terminate a 1gb point-to-point fiber...
4948 has X2-10GB-SR2960S has SFP-10G-SRHopefully this is a simple question - I'm connecting the two devices above and I need an LC to SC fiber cable. It should be pretty simple but I've seen two different types of LC/SC cables - one is 8.3/125 and on...
Here is the situation - we recently purchased L3 daughter cards (N55-D160L3-V2) for our 5548UPs along with the LAN Enterprise Services licenses (N55-LAN1K9). I installed the cards and Ent Svcs lic this past weekend and everything went well excep that...
I figured out the UCS issue - you can only use a Pool within a template. I didn't realize you had to upbind the profile(s) in order to set a Static IP address for the initiator. I suppose that makes sense, given that you each profile will have a diff...
Thanks for the reply Robert1) I originally had 2.0(1s) and now have 2.0(2q) - both have the same issue for me 2) I'm able to functionally "use" the iscsibootvswitch for iscsi datastore traffic, however, I just don't know if there is a downside to doi...
Thanks again leolahoo -- in general I don't like to be on the very latest OS but I've 5.2 ready to go for when we do decide to upgrade, probably in a couple of months I suppose.
Thanks for the input Reza - points awarded. We ordered a Transition Stand-Alone MC (SGETF10390-110). This will be converting our MMF fiber (LC) into 1000Base-T copper which will term into a 4948-10GE. Crossing my fingers!
