Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
IOS upgrade tried on the stack of 2XWS-C3750X-24T-S , Upgrade was tried to support WCCP on the platform. Current version is Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(58)SE1, Not able find any IP Plus ios in the site ?O...
We have ace configured in a failover pair, Trying to change the management IP but thwing an error "Inconsistent subnet"Management vlan interface is 1000, Running configuration of the admin context is attachedswitch/Admin(config)# int vlan 1000switc...
FEX 2Ks are connected to Nexus 5Ks , I am trying to add one port on the 2K to vlan 40 , vlan 40 already existing and there are active ports alredy on vlan 40. The port goes in to inactive mode soon as i add them to vlan 40. In vlan 1 the port is show...
I have translation rule like this below, i understand the rule that replaces the first digit 9 with 4 what is the significance of \1 at the end , I see in some rules it is \3 , \2 etc i am not able to corelate that to anything. May be a silly one but...
Which ios to be deleted ? Currently active one or the old oner which is not active?Why wccp is not available in current ios. Will it be available after the upgrade.I think both are same feature set but only a latest version.Sent from Cisco Technical ...
Is there any alternative way of utilising all links, I have only single vlan for switches hence no STP load balancing,I need to utilise all the links. any other thoughts ?Thx
Here is the output of isdn q931 debug:Also attaching the config for your sugession.Router#csim start 85148712csim: called number = 85148712, loop count = 1 ping count = 0Nov 10 19:12:53.667: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore: Calling Number=, ...
