Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've read a number of posts that the ACA balancing method for the CSS is not recommended because you never really know what it's going to do. Is this because of it's high flows/second requirement to effectively balance equally, or is it just simply ...
I'm trying to understand the risk rating calculation on an IPS4240 sensor. From what I can tell, it looks like there are some additional parameters added to the equation that are not easy to determine. It looks like the ARR (Attack Relevancy Rating...
Running FWSM 3.2(9) in a datacenter with active Oracle connections from an outside vlan to an inside vlan. Sqlnet inspection is enabled, however I don't believe it is needed, so I want to disable for possible performance improvement. If I remove th...
Has anyone ever done an all zeros BERT test to a remote loopback on a 3845 with a NM1-T3, or other router/T3 combo? I have a customer with a T3 that runs clean with no traffic flow, but then starts logging tons of controller errors (path-code violat...
Anyone run into any problems running 12.4(10b) on 1310G radios running as P-t-P bridges? I tried 12.4(10b)JA3 and got a really strange asymmetrical association rate; 1Mbps on one side and 54Mbps reported on the other. It ran extremely slow so I dow...
Hi, I have a couple of questions related to WSA. I'm looking for more information on anti-malware scanning, and have a couple of questions about external DLP. 1) Is the decision for whether or not content is scanned for anti-malware based entirely...
Hi Robert, how does the Cisco IPS systems compare with those from vendors like TippingPoint and McAfee? How does Cisco differentiate itself against these other products? I frequently get these types of questions in the field, and I'm not too famil...
Yep, that's exactly what I'm seeing. The longer it runs, the connections seem evenly distributed. It can definitely be a pain when you're testing because you cannot determine what server will get the next connection, however in production use, we d...
Hi Madhu, I'm looking at deploying an IDSM-2 and want release 7.0 with global correlation. Other than performance numbers and sensing-interface characteristics, are there any differences with capabilities between an IDSM-2 module for a 6500 chassis ...
