About rjtyrrell

rjtyrrell · 06-21-2006

This is likely a simple explanation, though I cannot find information on it anywhere so any help is greatly appreciated.I have two identical 7507 routers, with identical hardware, same ROM, same IOS, and same Bootloader. The configs are slightly diff...

rjtyrrell · 07-20-2006

Absolutely. You can assign pre-determined privilege levels, which is probably the easiest solution (there are 16 predefined priv levels, with 15=full access). See link below for details. If you really want to get granular, there is a way to create...

rjtyrrell · 06-22-2006

Sounds like the router portion is working as expected. Modems can be tricky. I've had similar problems in the past. Sounds like the modem is not configured properly. Perhaps it is not hanging up after it dials?Does the modem dial and connect the ...

rjtyrrell · 06-21-2006

Thanks for the response, Leon. I did actually initially look at NTP, which is configured. However, due to your recommendation, I revisited it and after debugging, found that the ntp authentication was failing. After correcting that issue, the ntp ...

rjtyrrell · 06-21-2006

Try searching Cisco's website for the "Dialer Watch" configuration parameters. Here's a brief description. Should work similarly for ISDN or POTS backups.http://www.cisco.com/warp/public/123/backup-main.html#dwatchRob

Member Since	‎03-23-2006 05:55 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5
Total Helpful Votes Received	7

User Statistics

User Activity

Sh run does not include "Config last saved..."

Re: cisco config policies

Re: external modem configuration

Re: Sh run does not include "Config last saved..."

Re: external modem configuration