Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone,I have two ACS 5.2 running as primary and secondary instances respectively. When I try to delete a remote log target under System Administration > ... > Configuration > Log Configuration > Remote Log TargetsI get the following error m...
For some reason when ever I create subinterfaces and place the bridge-group I can no longer see my dlsw circuit establish. without subinterface and encapsulation 802.1q it works fine.source-bridge ring-group 100dlsw local-peer peer-id 10.23.9.1 grou...
I was converting CatOS to IOS, near the end as I formatted the bootflash and SLot0: I guess I forgot to copy the IOS back and reloaded.Now I'm stuck in rommon mode and I tried everything to recover. I tried Xmodem but it keeps failing when it's com...
I have strange request, a vendor wants to do a VPN connection from our 3030 to their router to access a web site on a public IP via a LAN to LAN tunnel.How can this be done if our users are coming from a private connection behind the 3030? Do I need...
I have the Sup2 / MSFC2 and I formatted both Slot0: and bootflash.I try what you suggestted, So I guess since I'm always going into Rommon and there is no images I can't load the MSFC boot image from there.I'm supprised the recovery documentation dos...
I have the Sup2 / MSFC2 and I formatted both Slot0: and bootflash.I try what you suggestted, So I guess since I'm always going into Rommon and there is no images I can't load the MSFC boot image from there.I'm supprised the recovery documentation dos...
I have the Sup2 / MSFC2 and I formatted both Slot0: and bootflash.I try what you suggestted, So I guess since I'm always going into Rommon and there is no images I can't load the MSFC boot image from there.I'm supprised the recovery documentation dos...
