About phaon.reid

phaon.reid · 01-18-2011

We have two live WCS servers for our Northern and Southern Wireless estates, and have recently installed a third WCS (on a VMWare Platform) as a HA backup to the live servers.HA registration appears to have completed correctly, and HA Status shows th...

phaon.reid · 11-10-2013

We got PXE boot working with authentication order dot1x mab by setting dot1x timeout tx-period 1on the switchports (after a lot of experimentation)Phaon

phaon.reid · 02-14-2011

To limit logins, go to configure -> controllers -> controllerIP ->security -> user login policies and set "maximum number of concurrent logins for a single user name" to 3.To limit bandwidth per user, the easiest way would be to use 802.11b only! A...

phaon.reid · 01-19-2011

I have worked in data centres where they have insisted on a particular brand of cabling. It could be annoying having to pay an inflated price, and also perhaps suffer from extended lead times. On occasions it has been necessary to put in one set of...

phaon.reid · 01-19-2011

Hi SurendraThanks, yes, that's what the config guide says.After further experimentation I have come to the conclusion that the GUI of the secondary WCS is NOT accessible while it is in standby mode, and a non-live secondary is thus only accessible us...

Member Since	‎01-18-2011 03:48 AM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

WCS Failover - how does it work?

PXE boot with dot1x

Re: Controlling wireless access in a dormitory setting

Re: Structured cabling to support Cisco based networks

Re: WCS Failover - how does it work?