Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a new Dell Poweredge R720XD server with quad NIC and I am testing Server 2012.I am currently testing the new teaming feature in 2012 and will then go on to test HyperV with the virtual switch.Curently my outsourcing partner has enabled LACP o...
I have a number of existing 1140G Access points.I now need to purchase a couple of new AP's to expand coverage and it makes sense to go with the latest N standard ones.Currently I only have standalone models and at the moment I don't have the budget ...
I have a number of 3750 Switches, one will be in a location 400m away connected via fibre through GBIC modules. Can this be a stack member or does it have to be a seperate stack with its own IP address?
I have a number of 3750 switches stacked with the cables at the back.I now have a brand new 3750G 24-TS to install and I presume it makes sense for it to be the stack master as its the latest switch with the newest IOS.Should I just plug it in, or cl...
Hi AllI have a number of Catalyst 3750G switches, a combination of Gb and 10/100 POE models all stacked together.I am not a Cisco expert so they are pretty much installed as plug and play with one management switch assigned an IP address. No other tw...
Hi1. Switches are 3750G models using 1GB ethernet ports to the server.2. I have tried different combinations on the server, but at the monent all 4 ports are active, Teaming mode: LACP, Load balancing module:Address hash and no standby adaptersExisti...
thanks for the advice.One of the existing switches seems to be a different IOS version, its a IPSERVICESK9-M image rather than a IPBASE-M that the new Master is.What's the easiest way for me to sort this out?And also, how do I clear the config on th...
ok, please ignore this post. It seems one of the switches is not in the stack properly.I will have to re-connect the stack cables and restart the stack to see if it resolves the problem.Thanks anyway.
