Is it possible to initiates a new call to a specified number on SPA502G via http:// request ?I found that in this documnet http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/all_models/xsi/7_1_2/english/programming/guide/xsi712uri.html#wp1052447 th...
Call transfer are not working between two sites while blind transfers are working fine . I mean Call transfer like “Attn Transfer—Attended call transfer. The user answers the call beforetransferring it” and Blind Transfer like “Blind call transfer....
Does any one can confirm that SPA962 can communicate with CME (call manager express 4.1) to exchange information about presence (BLF feature on SPA 962) ? I found a lot of examples how to configure SPA962 to work with Asterisk or Broadsoft. I tried a...
Does any one knows what are the average IP performance for 2801,2811,2821,2851 for flows beetwen two onboard FE. With no sepcial features, only NAT nat QOS. No Voice etc.
No I didn't. It will never wor. And now when Cisco sold Linksys for sure it will not work. Switch to Cisco IP Phones or move to Asterisk Open Source ;(.
I can call from my mobie to this number but I can’t call to PSTN. When SPA502G user dial my mobile, my mobile is ringing, when I press answer button connection automatically ends.Phone is SPA502G with Software Version: 7.4.8a Hardware Versi...
Please find followed debg. I'm calling from 1501 to 1500 then press (TRANSFER) to 1502. attend the person and again TRANSFER (so this is attended transfer)=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.02.16 16:41:16 =~=~=~=~=~=~=~=~=~=~=~=lab1#sh dial-peer ...
No, from the beginning this is not possible. This is totally new project. In meanwhile I changed CME4,1 to CME7.1 and there is little progress. I can make Transfers between sites, but I can hear only in one direction.When I try to do Blind Transfer b...