Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have ASA 5505's up until yesterday they had a working VPN for months. Yesterday we had to change the public IP's for both 5505's. The first ASA #1 has about a dozen VPN's configured on it and is having no other issues except for this particular VPN...
I'm looking for a starting point in setting up some kind of link between CME and the NEC. It really doesn't matter if the link is T1 based or IP based. All I really need is to be able to dial from one system to the other and have the calling number s...
I have 2 2960's that I just finished setting up. I got all done and did a copy run tftp to back up the base config for storage. One of the switches immediately showed that it's host configuration file in sh ver was on the tftp server. Now at boot it ...
I've read in some places that it is not advised to use Vlan 1 for security reasons. Is this a real good idea or is it more of pain to implement? If it is something that should be setup and used, what are good tips for making the transition and what a...
At our main office we have the main network and a small vlan network for hosting a set of terminal servers for another office. Lets say the main office IP is 192.168.0.1/24 and a routed port for hosted network is 10.0.0.1/24. This is all running on a...
I have a 1811 that came with a Cisco 32mb flash card. I was able to install a generic 128mb flash card by plugging in a usb card reader to the routers usb port. Then I was able to format it as usbflash: if I remember correctly.
Attached is the configs of the 2 switches config 1 is the switch that keeps trying to load configuration from the tftp server. Config 2 is working just as it's supposed to.
