Has anyone upgraded an ASA5520 from 7.x to 8.4 in one step? Release notes for 8.4 state that you can "...upgrade from any previous release directly to 8.4..." I've read the previous version release notes and see the various changes in NAT etc that 8...
First time working with an ASA and LDAP. We're trying to require users to be part of a vpnusers group in a Sun One 5.2 directory. The ASA config examples all seem to assume that group membership values are assigned to the user object in LDAP. It's no...
We've got a 6513 running IOS 12.2.17 and FWSM running 2.3. Transparent, single context mode. We're configuring the MSFC to be outside the FWSM. We have created VLAN100 as FWSM inside and VLAN200 as the FWSM/MSFC link. VLANs 300-500 support traffic on...
Why does a 350 access point stop and start the fec0 driver so often? Sysloging to a unix system.Mar 6 16:25:36 (Info): Stopped driver for port "fec0"Mar 6 16:25:36 (Info): Started driver for port "fec0"Mar 6 16:28:38 (Info): Stopped driver for por...
Do the cisco 340/350 series of products, access points and clients, perform weak iv filtering? I haven't been able to find any reference tothis in documentation or a search of this site.Tye
We upgraded both pairs from 7.2(1) to 8.4(1) pretty much without incident. In one pair two rules failed to migrate which appeared to be related to NAT. Otherwise it was pretty smooth. We had one VPN tunnel setup on one pair, not in active use, and th...
There is a fundamental ldap object structure at issue. All of the Cisco configuration guides call out the user object having the "memberof" attribute. In our Sun One directory user objects do not have any "memberof" attributes. User objects are conta...
Discovered an interesting thing with failover on two ASA5520's. When I added the standby address to each interface config and reloaded I could pull a cable and watch a continuous ping I had running through the asa from outside to an inside host. The ...