Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I configured multiple vlan on my Cisco ASA5520. Everything work perfectly except RDP (3389) connections. The connections are established but but after a period of inactivity, the user is disconnected from server (black screen).The same problem ...
Hello,I have a Cisco UC540 on which are registred Cisco IP Phones. I configured a sip account to test SIP phones on UC, this is sip configuration :voice register global mode cme source-address 192.168.10.10 port 5060 max-dn 20 max-pool 20 authenticat...
Hello,We have deployed a Cisco C1861 on SRST mode. When link with CCM (v6.1) is up, incoming calls work fine.We have 2 isdn access connected on 1861 gateway. But when link is up, incoming calls failed with this message : Sending Complete Bearer Capa...
Hi all,I have question regarding steup corlist on Cisco UC500 with CLI.Outgoing calls are routed via a SIP trunk from a generic SIP provider.There is my config :dial-peer cor custom name national name gsm name international name urgence!dial-peer cor...
Hello,I applied this command :timeout conn 10:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 No disconnection between machines on the same vlan, but it still the case for machines on different vlan. Does thie has relation with MTU size ? Thanks....
Hi Chris,Yeah sorry, we are making tests with 2 phones so what in the debug, called number change..I did not put all ephone / ephone-dn configuration on the transmitted debug for confidentiality reasons.All phones are registred on CCM and internally ...
