About przemyslaw.wieczorek

przemyslaw.wieczorek · 03-01-2024

Hi,Is there a way to check how much data each node in deployment transmitted / received between each other? I can see that under monitoring I can create new Dashboard with received / transmit total bytes, but then I have multiple instances. Also when...

przemyslaw.wieczorek · 02-21-2024

Hi,I have established connection between ISE 3.2 and Azure with REST ID. Users I can authenticate but I can't do the same for PCs. I know there is limitation: Note: ROPC is limited to User authentication since it relies on the Username attribute duri...

przemyslaw.wieczorek · 08-29-2023

Hi all,Anyone has deployed ISE 3.x in Native Azure? I will be doing that soon but I'm stuck with disk selection. Which disk I should use - standard or premium? For now I was able to get information from TAC that I should use Premium SSD v2 and "ticke...

przemyslaw.wieczorek · 08-02-2023

Hi,There are few topic similar to this one, but none of the solutions worked for me. I have 2 x WLC 9800 in Azure with HA in between (without SSO). APs on one of them flaps randomly and what is important - not all APs from site at the same time. Seco...

przemyslaw.wieczorek · 01-18-2023

Hi all,I'm trying to migrate from WLC 5520 to 9800-CL and I need to create WLAN with CoA and it confused me a little bit.I have all WLANs which use FLEX only. Now for example, I have WLAN 1 which FLEX is configured to use VLAN 100. But I've also devi...

przemyslaw.wieczorek · 03-07-2024

Hi all,I'm going to implement this, however do I need to again configure all like it was shown in that manual = provision configuration from DNAC to WLC causing outage?

przemyslaw.wieczorek · 03-07-2024

So far I was able to check how to calculate used data overall - so not only between nodes but generally in/out everything. Go to Monitoring, scroll down to "Network Traffic - Received and Transmitted" - expand arrow near it > view, set period to X da...

przemyslaw.wieczorek · 03-04-2024

VM monitoring tools won't show me summary how much data was received / transmitted. So I believe that Monitoring / Log Analytics will be handy. When I open Monitoring I can see network speed, I can edit that and change command under Metrics browser, ...

przemyslaw.wieczorek · 09-04-2023

So Premium SSD (not v2) for Admin/MnT and Standards for PSN - that's the plan then

przemyslaw.wieczorek · 09-01-2023

@hslai So in my case that I can use Premium SSD v1 for PAN/MNT (on one node) and Standard SSD for PSN's?BTW - is Medium Size Deployment recommended or it's better to have Large so each persona has it's own node? I currently have Large but all sits on...

Member Since	‎10-22-2016 06:17 AM
Date Last Visited	‎03-13-2024 12:02 AM
Posts	26
Total Helpful Votes Received	10

User Statistics

User Activity

ISE 3.2 - traffic calculation between nodes

ISE 3.2 - Azure REST ID vs devices

CISCO ISE 3.2 - Azure deployment

vWLC 9800 - AP 3800/3700 flaps between WLC in HA

Cisco 9800-CL - CoA with FLEX

Re: AI-Enhanced RRM: Not initiated. No AI-Enhanced RRM enabled buildin

Re: ISE 3.2 - traffic calculation between nodes

Re: ISE 3.2 - traffic calculation between nodes

Re: CISCO ISE 3.2 - Azure deployment

Re: CISCO ISE 3.2 - Azure deployment