About rreitenauer

rreitenauer · 02-07-2017

I am looking to turn off the SLAAC addressing for a vlan interface that Windows servers and network devices will use. We will manually set the IPv6 addresses and do not want the SLAAC addressing. I put these on the vlan interface -- similar to what...

rreitenauer · 10-24-2016

I have a DMVPN site with EIGRP named mode and need to redistribute static addresses. I have no problem doing this by enabling EIGRP stub static and then doing a redistribute. However, from reading it looks like this breaks spoke to spoke communicat...

rreitenauer · 02-07-2017

I found this and will see if it works. http://mor-pah.net/2012/11/06/cisco-ios-disabling-ipv6-stateless-autoconfig/

rreitenauer · 10-26-2016

Thanks, I created a redistribute metric of topology base redistribute static metric 10000 100 255 1 1500 and removed the eigrp stub static. All is working good now.

rreitenauer · 10-25-2016

I'll try the metric, I just created a route-map for distribution.

rreitenauer · 10-24-2016

I tried, however they will not redistribute until I put in eigrp stub static.

Member Since	‎10-24-2016 09:27 AM
Date Last Visited	‎12-12-2019 11:28 AM
Posts	6

User Statistics

User Activity

IPv6 Assignment -- Static addressing only (Windows Servers)

EIGRP Stub - still allow spoke to spoke communication

I found this and will see if

Thanks, I created a

I'll try the metric, I just

I tried, however they will