Hi, i got a BGP LAN and need to connect serveral L3 OSPF devices with Client-Networks. For the incoming routes i do a redistribution from OSPF (Client-Networks) to BGP and 50% of the work is done. If someone creates a new VNI the LAN automatically le...

Hi,i have a 3750 with 12.2.55SE7 and he has some output queue 3 dropps at threashold 3. As far as i remember the threshold three is a static parameter on the switch. In fact that there is only a telephone located at this port it is not easy to explai...

Hi together,i've tried to set a 1242ag into bridge mode for checking the wireless-mesh function. After that switch the ap won't connect to the wlc anymore. Normally the AP should connect to the WLC as a RAP (AP with connection to the LAN) and providi...

Hi together,i want to ask you for a good way to solve a problem:One of my friends has an AS connected to two different providers. The routers have the full BGB Table and the routingtable prefers the provider that is closest to the destination somewhe...

Hi,it was too long ago with MLS and MSFC .. so i forgot the answer :-)Starting Scenario:Two 6500/Sup720 "Routers" with HSRP about 20 VLANs and three more 6500/Sup720 "Switches" only in Layer 2 with the same VLANs and redundant Uplinks to the "Routers...