Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I want to enbale IGMP Snooping Querying on SGE-20x0P switches. IGMP Snooping is enable on the VLAN but I need IGMP Querying that Multicast traffic only forwarded to port that request udp from IPTV core switch not all ports that assign to IPTV VLAN...
My default country code was US and I can't choose DCA channels, I change county code to United States(DCA) but still I can't choose DCA channel, only 149-165 channels shown in "RF Backhaul Channel Assignment". We have WLC 4402 release 4.2.176.51M Mes...
We have WLC 4402 software version 4.2.207.0 and LWAP 1510Our wireless network is mesh but i don't know why this release support mesh access point because i found below text in Cisco help center:"Do not upgrade to controller software release 4.2.207.0...
We have WLC 4402 and LWAP 1510In access control list menu, all needed rule added and the last rule deny any to anyWe use Ethernet bridging on LWAP and some clients connect with wire network that associated with Ethernet bridge LWAP, Now when deny rul...
We have WLC-4402 and LWAP-1510, we have issue when users trying to connect to pppoe server with pppoe connection from wireless network. On LAN, pppoe connection work properly and everything is normal. Also I enable broadcast fowarding on GUI but he p...
Thanks for your reply Tom, my issue in IPTV network is when port 1 in switch A and port 2 in switch B want to see channel 1 of TV the udp traffic broadcast to all port of that switches on the IPTV vlan, we need to forward traffic to port 1 of switch...
Thanks for your quick reply, we haven't service contract to download software image 4.2.207.54MNow we have only release 4.2.176.51MSurendra, are you sure that after upgrade 4.2.207.0 to 4.2.176.51M the controller and AP's work properly?
